Mitel 5207 - Manual (Page 16)

MITEL Networks 5207 IP Phone
User’s Guide 12
Rev. 012805
Call Forward - Remote
To forward calls from a remote station to your current location:
1. Press SUPERKEY
2. Press # until “Call Forwarding?” appears
3. Press * for Yes
4. Press # until “I AM HERE?” appears
5. Press * for Review
6. If a number is already programmed, press * for change
7. Press * to Program
8. Dial the extension number of the remote station
9. Press to Save
10. Press SUPERKEY to leave the programming mode
To cancel Call Forward – Remote from the station that set the remote forwarding:
1. Lift the handset
2. Dial #66
3. Dial the extension of the remote station
4. Hang up
To cancel Call Forward – Remote from the station that was forwarded:
1. Lift the handset
2. Dial #64
3. Hang up
Call Forward - End Chaining
To ensure that calls do not get forwarded again by the destination number:
1. Lift the handset
2. Dial *63
3. Hang up
To again allow calls to be forwarded by the destination number:
1. Lift the handset
2. Dial #63
3. Hang up