Mitel 5207 - Manual (Page 15)

MITEL Networks 5207 IP Phone
User’s Guide 11
Rev. 012805
Call Forward
Call Forward lets you redirect incoming calls to an alternate number. ALWAYS
redirects all incoming calls regardless of the state of your telephone. B-INT
redirects internal calls when your telephone is busy, and B-EXT redirects
external calls when your telephone is busy. NA-INT redirects internal calls after
several rings if you don’t answer, and NA-EXT redirects external calls after
several rings if you don’t answer.
Note: For information about “I AM HERE”, see Call Forward – Remote
To program Call Forward:
1. Press SUPERKEY
2. Press # until “Call Forwarding?” appears
3. Press * for Yes
4. Press # until the type of Call Forward that you want to set up appears (see
above note).
5. Press * for Review
6. If a number is already programmed, press * for change
7. Press * to Program
8. Dial the destination number
9. Press to Save
10. Continue programming other types of Call Forward
–OR-
Press SUPERKEY to leave the programming mode
To turn Call Forward on and off (once it has been programmed)
1. Press SUPERKEY
2. Press # until “Call Forwarding?” appears
3. Press * for Yes
4. Do one of the following:
To turn Call Forward ALWAYS on or off, press * for Review, press * for
Change and then press # to turn on or off
To turn another type of Call Forward on or off, press # until you reach
the desired display. Press * for Review, press * for Change and then
press # to turn on or off.
5. Continue turning other types of Call Forward on or off
–OR-
Press SUPERKEY to leave the programming mode