Mustek TP-6000 - Manual (Page 24)

TP6000 USER’S MANUAL 4 - 4
Software Support
The TP6000 series provides a software power off command for application
program maneuvers. The TP6000 also provides a specific means for the software to
detect if the system is working on external or UPS battery power. Due to this feature,
compatible software applications have the ability to change operating conditions when
running on standard/backup power. The software programmer may take reference
from the TP6000 technical manual to apply such features.
Preset Power On Control
The system may also be turned on according to predetermined parameters,
such as Modem Ring Up, Alarm Clock Wake Up and/or Wake-on-LAN.
To utilize these functions, the user should enter the CMOS setup by pressing
the “DEL” key at system boot up and choose the “INTEGRATED PERIPHERALS”
option. Next, set the “Ring Power Up Control” to enable for Modem Ring Up or
select the “Power Up by Alarm” for Alarm Clock Wake Up. Save the configuration
and exit the CMOS setup program. The Preset Power On Control will then be
activated. However, for the Wake-on-LAN feature, certain specific programs have to
be executed prior to power off. This program will set the terminal to standby for LAN
Wake Up during power off so that when the predefined condition is met (LAN status
changes or receives a certain packet) the TP6000 will then be powered on.
When the TP6000 system is turned off after a successful boot up, the defined
preset power on functions will keep monitoring for the preset conditions. When a
Modem call or Wake-on-LAN Packet is received, the system will be turned on and
start to work according to the security conditions that the application program defines,
only if the Ring Power Up Control or LAN Wake Up function is enabled. If the Power
Up by Alarm is enabled, the TP6000 system will be turned on at the defined time
(Hour : Minute : Second) of the preset day of week, day of month, month of year or
even every day if the date items are not defined.
Please note that if the TP6000 system is improperly turned off before a
complete boot up process, the above preset power on control functions will be
disabled until completion of the next successful boot process.