Changing your radio’ s settings, Changing your radio’s settings – Motorola T7100 User Manual

Page 19

Changing your Radio’

s Settings

Note: Your radio will only communicate with radios set to the same Channel

and Interference Eliminator Code.

Changing your Radio’s Settings

Setting the Channel

• Turn radio On.
• To set, press once the Channel display begins to flash.
• Then press or to choose the Channel.
• Press to exit this menu.

Note: The red indicator light above the display flashes every

second when the Channel is in use.

Setting the Interference Eliminator Code

The Interference Eliminator Code helps minimize interfer-
ence by providing you with a choice of code combinations.

• Turn radio On.
• To set, press twice the Code display begins to flash.
• Then press or to choose the Code.
• Press to exit this menu.

Note: To hear everyone on your Channel, or to communicate with a radio

that does not have Interference Eliminator Codes, select Interference
Eliminator Code .