McIntosh C200 - Manual (Page 9)

9
Installation
4 - 7/8 "
12.38cm
17- 1/16 "
43.34cm
Cutout Opening for Custom Mounting
C200P Front Panel
Custom Cabinet Cutout
14"
35.56cm
14"
35.56cm
15- 1/16 "
38.26cm
17/32 "
1.35cm
Cutout Opening
for Ventilation
Cutout Opening for Ventilation
Support
Shelf
Cabinet
Front
Panel
Chassis
Spacers
C200P Side View
in Custom Cabinet
C200P Bottom View
in Custom Cabinet
1 "
2.54cm
powered amplifier. If all the components are installed in a
single cabinet, a quiet running ventilation fan can be a defi-
nite asset in maintaining all the system components at the
coolest possible operating temperature.
A custom cabinet installation should provide the follow-
ing minimum spacing dimensions for cool operation. Allow
at least 2 inches (5.08cm) above the top, 2 inches (5.08cm)
below the bottom and 1 inch (2.54cm) on each side of the
Controller and Preamplifier, so that airflow is not ob-
structed. Allow 20 inches (50.8cm) depth behind the front
panel. Allow 1 inch (2.54cm) in front of the mounting
panel for knob clearance. Be sure to cut out a ventilation
hole in the mounting shelf according to the dimensions in
the drawing.