McIntosh C200 - Manual (Page 8)

8
Installation
The C200C and C200P can be placed upright on a table or
shelf, standing on its four feet.The four feet may be re-
moved from the bottom of both units when it is custom in-
stalled as outlined below. The four feet together with the
mounting screws should be retained for possible future use
if the C200 Controller and Preamplifier are removed from
the custom installation and used free standing. They also
4 - 7/8 "
12.38cm
17- 1/16 "
43.34cm
Cutout Opening for Custom Mounting
C200C Front Panel
Custom Cabinet Cutout
14"
35.56cm
14"
35.56cm
15- 1/16 "
38.26cm
17/32 "
1.35cm
Cutout Opening
for Ventilation
Cutout Opening for Ventilation
Support
Shelf
Cabinet
Front
Panel
Chassis
Spacers
C200C Side View
in Custom Cabinet
C200C Bottom View
in Custom Cabinet
1 "
2.54cm
can be custom installed in a piece of furniture or cabinet of
your choice. The required panel cutout, ventilation cutout
and unit dimensions are shown.
Always provide adequate ventilation for your C200.
Cool operation ensures the longest possible operating life
for any electronic instrument. Do not install the C200 di-
rectly above a heat generating component such as a high