McIntosh C200 - Manual (Page 26)

26
Specifications
Frequency Response
+0, -0.5dB from 10Hz to 40,000Hz
Total Harmonic Distortion
0.002% from 20Hz to 20,000Hz
Signal To Noise Ratio
Phono, 86dB
High Level, 100dB
Maximum Voltage Output
12V RMS Unbalanced, 25V RMS Balanced
Output Impedance
50 ohms, Balanced and Unbalanced
Sensitivity
Phono MM, 4.4mV for 2.5V rated output (1mV IHF)
Phono MC, 140uV for 2.5V rated output
High Level, 450mV for 2.5V rated output
Input Impedance
Phono MC, 10 ohms
Phono MM, 47K ohms, 65pF
High Level, 22K Unbalanced, 44K Balanced
Maximum Input Signal
Phono MM, 50mV
High Level, 5V Unbalanced, 5V Balanced
Power Requirements
100 Volts, 50/60Hz at 30 watts
110 Volts, 50/60Hz at 30 watts
120 Volts, 50/60Hz at 30 watts
220 Volts, 50/60Hz at 30 watts
230 Volts, 50/60Hz at 30 watts
240 Volts, 50/60Hz at 30 watts
Note: Refer to the rear panel of the C200C for the correct
voltage.
Specifications
Overall Dimensions
17-1/2 inches (44.5cm) W, 6 inches (13.7cm) H, 20 inches
(44.5cm) D (including clearance for connectors)
Weight
C200C - 26.0 pounds (11.79 kg) net, 40.4 pounds (18.32
kg) in shipping carton
C200P - 20.5pounds (9.3 kg) net, 34.9 pounds (15.82 kg)
in shipping carton