Multitech V.90/K56FLEX MT5600ZDXV - Manual (Page 51)

51
User Guide
Command: :En MNP 10 Compromise Equalizer Enable Command
Values: n = 0 or 1
Default: n/a
Description: :E0 n/a
:E1 n/a
*This command is included only for compatibility and performs no
function.
Command: *B View Numbers in Blacklist
Values: n/a
Description: This command requests the modem to return a list of
blacklisted numbers to the DTE. Permanently
forbidden numbers as defined by country require-
ments will not appear on this list. If no numbers are
blacklisted, only the OK result code is issued. The
format of the response is shown by the example
below:
No. -- Phone Number
1; 6127853500
2; 2154778767
3; 2128724549
Command: *D View Delayed Numbers
Values: n/a
Description: This command causes the modem to send a list of the
delayed numbers together with the delay associated
with each. The modem will return a list of delayed
telephone numbers as defined in the *B command. If
no numbers are delayed, only the OK result code is
issued. The format of the response is shown by the
example below (delay times are shown
as:hours:minutes:seconds):
No. -- Phone Number--Delay
1; 6127853500 1:59:25
2; 2154778767 0:4:43
3; 2128724549 2:33:00