Multitech V.90/K56FLEX MT5600ZDXV - Manual (Page 38)

38
Models MT5600ZDX & ZDXV
Command: Sn Read/Write Register Value
Values: n, v, or ?
Default: None
Description: The modem selects an S-Register, performs an S-
Register read or write function, or reports the value
of an S-Register:
n Establishes S-Register n as the last
accessed.
n=v Sets the S-Register value.
n? Reports the value of S-Register n.
For example:
ATS7 establishes S7 as the last accessed register.
AT=40 sets the contents of the last register accessed
to 40.
ATS=20 sets the contents of the last register access-
ed to 20.
Command: Vn Terse/Verbose Result Code Format
Values: n = 0 or 1
Default: 1
Description: V0 Displays Result Codes as digits (terse response).
V1 Displays Result Codes as words (verbose response).
Command: Wn Connect Message Control
Values: n = 0, 1 or 2
Default: 0
Description: W 0 Upon connection, the modem reports DTE speed
only (e.g., CONNECT 56000). Other responses are
disabled.
W 1 Upon connection, the modem reports the line
speed, the error correction protocol, and the DTE
speed. Other responses are disabled.
W 2 Upon connection, the modem reports DCE speed
only (e.g., CONNECT 28800). Other responses are
disabled.
*The Wn command controls the format of CONNECT messages. The
parameter value, if valid, is written to S31 bits 2 and 3. The Wn command
can be overridden by register S95.