Memorex MPH2430 - Manual (Page 38)

37
TURNING THE ANSWERING SYSTEM ON/OFF
NOTE:
• Once the answering system is turned off, the answer function will answer after
the 10th ring, allowing you to turn the answering system on from a remote
location.
Press the ANS ON/OFF button to turn
the answering system on; the unit will
announce “Answering machine is on”
and the ANS ON/OFF indicator will
light.
1
Press the ANS ON/OFF button again
to turn the answering system off; the
unit will announce “Answering
machine is off” and the ANS ON/OFF
indicator will go off.
2
SETTING THE ANNC/ICM SWITCH
SET TO ICM:
When this switch is in the ICM position
and the answering system receives a
call, it will play the OGM and record a
message.
1
SET TO ANNC:
When this switch is in the ANNC
position and the answering system
receives a call, it will play the announce-
ment and not record a message (“Ao”
will appear in the Message Display).
Record an announcement by pressing
and holding the OGM button and
recording it after the unit announces,
“Please record your announcement
after the beep”. Release the OGM
button when recording is completed.
2
ANSWERING MACHINE OPERATION (CONTINUED)
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 37