Memorex MPH2430 - Manual (Page 18)

17
SETTING THE FLASH TIME
This unit enables you to select the standard flash time applicable to your calling
area, which is useful when “clicking” over to a call waiting call or for PBX systems.
If you are not sure of the flash time, call your local telephone company. Set the
Flash Time as follows:
Press and hold the VOICE MAIL/
MENU button for more than two
seconds; the Ringer Volume setting
will appear in the display.
1
Press the Scroll Down button ❶ six
times or the 7 key button ❷; the Flash
Time setting will appear.
2
1
2
Press the EDIT/FLASH button to
change the setting; the Flash Time
setting will blink.
3
Press the Scroll Up ❶ or Down ❷
button to select a desired Flash Time
(in milli-seconds).
2
1
4
When the desired Flash Time setting
appears, press and hold the SAVE/
RE/PA button for more than two
seconds; a long beep will be heard to
confirm the setting has been saved.
5
You can continue with programming or
press the VOICE MAIL/MENU button
to return to the Standby mode.
6
SET-UP INSTRUCTIONS (CONTINUED)
MPH2430.O/M.QXD 1/29/03 9:12 AM Page 17