Multi-Tech Systems MT3334HD8 - Manual (Page 9)

1 Introduction
CommPlete Communications Server 3
Chapter 2 Installation
This chapter describes how to install the MT3334HD8 into the CC9600 chassis.
Chapter 3 Command Mode Operation
This chapter provides an introduction to MT3334HD8 command mode fundamentals, followed by a
detailed explanation of each AT command, providing examples where applicable.
Chapter 4 S-Registers
This chapter describes the MT3334HD8’s S-registers, which are used to store various modem options.
Each S-register is defined and explained.
Chapter 5 Testing the MT3334HD8
This chapter describes loopback testing for the MT3334HD8.
Chapter 6 Warranty, Service, and Technical Support
This chapter provides the terms of the MT3334HD8’s warranty, instructions for obtaining factory service,
and information about Multi-Tech’s BBS and technical support. Information on upgrading the
MT3334HD8’s firmware is also provided.
Appendix A ASCII Conversion Chart
Appendix B Dial Pulses and Tones
Appendix C Result Code Summary
Appendix D S-Register Summary
Appendix E AT Command Summary
Appendix F Remote Configuration