Copy disc to disc, Registering data to the hard drive (hdd) – MicroBoards Technology Premium Pro User Manual

Page 11

DVD Premium Pro Series MICROBOARDS TECHNOLOGY, LLC

Copy Start?
(DISC to DISC)

MASTER SELECT?
(DISC to DISC)

READER?
(DISC to DISC)

HDD1?
(DISC to HDD)

Copy Disc to Disc

1. Place the Master Disc into the Reader drive.

Place the blank disc(s) into the Recorder drive(s) and wait 10 seconds for the light(s) on
the front of the Recorder(s) to stop blinking. Note that the blanks must be of the same
media type as the master; you cannot copy a CD master to DVD’s, for instance.

2. The display reads COPY START? (DISC to DISC).

3. Press YES. If you have the Auto Run feature set to ON, the duplication will begin when

the master is loaded and all drives are loaded with blank media.

4. The drive trays will open on any recorder without blank discs installed. If you do not want

to make a copy in those drives, close the tray(s), wait for the drive light to go out, and
then press the YES button to start the copy job.

5. The display will now show the progress of the Copy Job.

6. The Recorder(s) will eject the recordable discs when the job is complete.

Registering Data to the Hard Drive (HDD)

When registering data to a partition on the internal hard drive, you do have the option of
recording to the blank media as well. In the SETUP menu, go to “Copy DISC to HD/DISC”
and change the setting from OFF to ON. This will allow the data from the master disc to be
copied to the internal hard drive, as well as any blank discs you have in the recorders. See
page 14 for a description of the SETUP menu.

1. At the COPY START? (DISC to DISC) menu, press the NO or ▼ button until the display

shows MASTER SELECT? (DISC TO DISC)

2. Place the Master disc into the Reader drive.
3. Press the YES button.
4. The display will show:

5. Press the NO or ▼ button
6. The display will now show:

7. If you wish to copy the data to the 1

partition, press the YES button.

8. If you wish to select another partition, press the NO or ▼ button.

9. By continuing to press the NO or ▼ button, you will scroll through the different HDD

partitions. Once you are at the partition you wish to use, press the YES button.

10. The display will now show the progress of the data being transferred to the hard drive:

COPY 4.0GB
DVD 25%