Muratec F-300 - Manual (Page 107)

6-7 U
SING
F-
CODE FEATURES
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
U
SING
F-
CODE
BOX
FEA
TURES
Printing a list of F-code boxes
To print a list of your F-code boxes, press [Menu], [5], [1], [1], [3], then [Enter].
Printing a list of documents stored in your F-code boxes
To print a list of documents stored in F-code boxes, press [Menu], [5], [1], [1], [4], then
[Enter].
Erasing an empty F-code box
An F-code box must be empty in order to erase it. (If you select an F-code box in these
steps which is not empty, the machine beeps. If this happens, print all documents in that
box before erasing it.)
To erase an empty F-code box:
1
Press [Menu], [3], [4], [2], then [Enter].
Select F-Code Box
01:Bulletin box 1
2
Press [ ] or [ ] to select the F-code box you want to erase. Then press [Enter].
03:Erase F-Code Box
Enter I.D. Code:****
3
Use the numeric keys to enter the four-digit I.D. code.
(If you have not set the I.D. code for operation protect, you can skip this step.)
4
Press [Enter].
The following two displays will appear alternately:
01:Erase F-Code Box
Yes  Enter
01:Erase F-Code Box
No  Cancel
5
Press [Enter] to erase the F-code box.
If you want to cancel the erasing this box, press [Cancel] and go back to step 2.
6
Press [Reset] to return to the standby mode.