Miele T 4422 C - Manual (Page 47)

Memory
The additional options selected
previously for specific programmes
are stored in the machine’s memory.
The machine is delivered with this
programmable function deactivated. It
can be activated if wished.
Programming and
storing in memory
The programmable functions are
activated to call up further features not
shown on the control panel by using the
additional option buttons in
combination with the programme
selector.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at
Finish .
A Press the additional option buttons
Short and Low temperature at the
same time, hold pressed in and ...
B ... switch on the dryer with the
I-On/0-Off button.
C Let go of all these buttons.
– "
P" will appear in the display.
– The Drying and Cool air indicator
lights will flash.
D Turn the programme selector to
COTTONS, Normal .
E The number of the programmable
function will flash alternately with the
"
P" on the left of the display -
P: P...3...P... 3... .
The number on the right will show
constantly:
0 = Memory function -
off
1 = Memory function -
on
F Press the
Start button to change the
number on the right from
0 to 1 = on or from
1 to 0 = off.
The setting you have selected is now
stored in memory.
G Switch the machine off with the
I-On/0-Off button.
To check:
^ Carry out steps A to E.
^ Switch off the dryer.
The check is complete.
Programmable functions
47