Short 16, Low temperature 16, Buzzer 16 – Miele T 4422 C User Manual
Page 16: E delay start 16, How to dry correctly, Edelay start
Short
For drying fabrics which can
withstand high temperatures, e.g.
pure linens and cottons. Do not use
on minimum iron or delicate fabrics.
– Because the heater rating is
increased clothes dry faster thus
shortening drying times.
Low temperature
For drying delicate fabrics with the
symbol
r (e.g. acrylic garments) at a
lower temperature.
Because the heater rating is reduced
clothes dry more slowly thus
lengthening drying times.
Buzzer
An audible tone sounds repeatedly at
the end of a programme.
^ The buzzer can be switched on or off
after a programme has started.
The volume (and pitch) of the buzzer
can be adjusted before a programme is
started:
^ Select the programme.
^ Press the "Buzzer" button (the
"Buzzer" indicator lamp will light up)
until the desired volume / pitch is
achieved. Then release the button.
E
Delay start
Once a programme has been
selected, the start can be delayed by
30 minutes (
30) up to 24 hours (24^).
^ Press the
Delay start
button
repeatedly until the required time
appears in the display :
-
up to
10^ in 30 minute stages.
-
over
10^ in 1 hour stages.
The time will run up to
24^ by
keeping the button pressed in.
Press the
Start
button. The chosen time
will count down as follows:
– from
24^ to 10^ in 1 hour stages.
– less than
10^ in 1 minute stages.
The dryer starts automatically once the
delay start period has elapsed. The
time left will appear in the display
approx. 1 minute into the programme.
To cancel "Delay start":
Before the
Start
button has been
pressed:
^ Press the
Delay start
button once
when
24^ is showing in the display;
After the
Start
button has been
pressed:
^ Turn the programme selector to the
Finish
position.
How to dry correctly
16