Miele T 4422 C - Manual (Page 20)

The system lock prevents anyone
from interfering with the dryer.
If the system lock has been activated it
is not possible to start a programme.
The following steps (
A,B,C...) must
be carried out in the correct order .
Please proceed step by step:
To activate the system lock
A Ensure that the door is closed and
that the programme selector is
turned to
Finish .
B Switch on the dryer with the
I-On/O-Off button.
C Press the
Anti-crease button and
keep it pressed in while carrying out
steps
D to F.
D Slowly turn the programme selector
clockwise stage by stage until it
reaches the COTTONS/
Normal
position.
E Slowly turn the programme selector
anti-clockwise stage by stage until it
reaches the
Finish position.
F Slowly turn the programme selector
anti-clockwise stage by stage until it
reaches the MINIMUM IRON/
Hand
iron position.
The Locked indicator lamp will flash.
G Release the
Anti-crease button.
The system lock is now activated.
H Switch off the dryer with the
I-On/O-Off button.
To de-activate the system lock
^ Repeat steps A-G.
The Locked indicator lamp will go out
after step
F.
Electronic system lock
20