Memorex MPD8857 User Manual

Page 16

NOTES ON PROGRAM PLAYBACK
• You can review the program by pressing the PROGRAM button

repeatedly while in the Stop mode.

• To add a track to the program memory, simply press the PROGRAM

button repeatedly until the track (Directory for MP3) appears and “00”
blinks in the display, then follow steps 2 and 3 on the previous page.

• Press the STOP (■) /POWER OFF button to stop the program before

it is finished (the program memory will be kept).

• Each file may be stored in the program memory as many times as

desired (up to 24 files).

• You can skip tracks/directories through the program while it is playing

using the Skip/TUNING DN

or UP

button.

CD OPERATION (CONTINUED)

ESP (ELECTRONIC SKIP PROTECTION)

This feature protects against loss of sound caused by vibrations and
shocks. Continuous playback is ensured once some of the music has
been stored into memory.
ESP will automatically be activated when listening to standard or MP3
CDs. You cannot deactivate ESP while listening to an MP3 CD. However,
you can deactivate it when playing a standard CD by simply pressing the
MENU/ESP/BAND button; the ESP indicator will disappear from the
display. Deactivating the ESP will conserve battery life.

RESUME

This unit has Auto resume, which will resume playback of the previous
track when the unit is turned on (and the same CD is still in the CD
compartment).
The

RESUME/

button will allow you to resume playback of a CD that

was previously stopped. If you stopped a CD in the middle of playing,
simply press the

RESUME/

button and the CD will continue at the start

of the last played track.

MPD8857.O/M.QXD 5/2/03 9:12 AM Page 15