Memorex MPD8857 - Manual (Page 15)

14
CD OPERATION (CONTINUED)
While in the Stop mode, press the
PROGRAM button. The track number will
blink and “P-01” will appear in the
display.
1
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Programming is the ability to preselect the order in which a series of tracks will be
played.
Select a track to be programmed using the
Skip/TUNING DN
❶ or UP ❷
button. If using a MP3 disc, see note
below.
2
1
2
Press the PROGRAM button to
memorize the track. Repeat steps 2
and 3 to program additional tracks up
to a maximum of 24 tracks.
3
Press the PLAY/PAUSE ( )/POWER
ON button ❶ to begin programmed
playback; “P” will appear in the display.
After the program is played, it will stop
or press the
STOP (■) /POWER OFF
button ❷ to stop programmed playback.
1
2
4
NOTES:
• When in the Stop mode, press and hold the ENTER/CLEAR button for two
seconds to clear the memory; “P” indicator will disappear.
• MP3: If an MP3 CD is inserted, you will first select the directory number in step
1, press the PROG button, and then the file/track number.
SEE TOP OF NEXT PAGE FOR MORE NOTES ON PROGRAMMING
THE MEMORY.
MPD8857.O/M.QXD 5/2/03 9:12 AM Page 14