MITSUBISHI ELECTRIC DX-PC25EA - Manual (Page 15)

- 15 -
To convert into JPEG file:
When you press the [JPEG] button, the following window for specifying the folder where the
converted video data are saved will appear.
When you press the [OK] button after specifying the folder, collective conversion will start and the
window showing the progress of the conversion will appear.
When the conversion completes, [Generation of JPEG was completed successfully.] will appear.
The video data are saved as follows.
- A folder bearing the conversion start date and time in its name will be created in the folder you
specified.
(Example) 09012005123456 : In the case of conversion performed at 12:34:56 on January 9,
2005.
- Serial-numbered JPEG files are created in the automatically created folder starting from
“D00000.jpg”.
To convert into AVI file:
When you click the [AVI] button, the following window for setting the AVI file will appear.
[Image Size] ----- Select the size of the picture contained in the AVI file among three choices below.
[Large] : 981 x 720 pixels, [Normal] : 654 x 480 pixels, [Small] : 327 x 240 pixels
[Frame Rate] ---- Select the speed to play back the AVI file among five levels from [Fast] to [Slow].
When you press the [Convert] button while this window is being displayed, the window for
specifying the folder where the AVI file is saved will appear.
When you press the [Save] button after specifying the folder, collective conversion will start and
the window showing the progress of the conversion will appear.
When the conversion completes, [Generation of AVI was completed successfully.] will appear.