Motorola MD60 Series - Manual (Page 19)

17
Getti
ng Started
Note: Install and charge the battery pack before you
register a new handset.
Action
1 Ensure the base station is off. Press v if
necessary.
2 Press MENU ( a ) on the base station.
3 Scroll ( a ) to DISPLAY BASE-ID , then
press OK ( a ). The base station displays
the 15-digit base ID code.
4 Press NEW ( a ) on the handset. The
ENTER BASE ID screen displays.
5 Using the keys on the handset, enter the
15-digit base ID code, then press OK ( a ).
If you make a mistake while entering the
code, press the left soft key (
<
) to clear it.
6 The base ID code may contain numbers and
characters such as #. Make sure to enter all
15 numbers and characters.
7 If ENTER BASE ID displays, 1 or more
characters were entered incorrectly. Re-
enter the base ID code.
8 Several screens display briefly, the handset
sounds a confirmation beep, and then
returns to the standby screen.
GettingStarted.fm Page 17 Friday, July 25, 2003 4:53 PM