Magellan Maestro 4050 - Manual (Page 26)

Map Screen 15
Maneuver List Screen
This screen is accessed from the Map screen and
only when routing. (Note: The Maneuver List screen
is not available until you begin moving on the route.)
Each line in the maneuver list provides details about
the maneuver in the order that they are to be made,
with the next maneuver at the top.
The bottom bar of the Maneuver List indicates the
distance and time to the next maneuver as well as
the total distance computed for the route.
The Maneuver List can be modified if you want to
exclude one of the maneuvers should you want to
avoid travelling one of the streets listed. Instructions
to exclude one of the maneuvers is described in this
chapter.
Accessing the Maneuver List
1. Tap the maneuver icon in the lower left corner of the Map screen. This icon is displayed only
while on an active route.
Excluding a Maneuver
This is used to modify the route to possibly avoid routing on a particular street.
1. Access the Maneuver List.
2. Tap on the item in the list with the street
you want to try and avoid.
3. Confirm the exclusion by tapping on
. (Tap the back arrow to cancel.)
4. The Magellan Maestro recalculates the
route and displays the Maneuver List with
the newly computed maneuvers.
Maneuver List
The maneuver highlighted indicates that you
will be instructed to make a right turn in 0.5
miles on N. Marengo Ave.
In this example, Exit-45/Santa Ana/CA-57 is
to be excluded from the route.
The Maneuver List displays the new route.