Morphy Richards Steam Generator - Manual (Page 3)

3
Special instructions
• If your steam generator does not work,
check the following points:
Has the temperature control been set to
the required temperature? Is the plug in
it’s socket? Is the plug itself or the socket
faulty? (Check by plugging in another
appliance).
• To prevent damage to the textile being
ironed, follow the temperature guide
carefully. (Test the inside of the hem of the
garment).
• When ironing is complete, remove the
plug from the socket, empty any
remaining water from the tank, and allow
to cool before storage.
• If you drop or severely knock your steam
generator, this could cause internal
damage even if the outside appears
alright. Have it checked by a qualified
electrician.
• The temperature of accessible surfaces
may be high when the appliance is
operating.
WARNING: Do not use the product on a
surface which could be damaged by heat
or steam such as a worktop or a polished
wooden surface.
Electrical requirements
Check that the voltage on the rating plate
of your appliance corresponds with your
house electricity supply which must be A.C.
(Alternating current).
For appliances with fitted plug.
If the socket outlets in your home are not
suitable for the plug supplied with this
appliance, the plug should be removed and
the appropriate one fitted.
WARNING : The plug removed from the
mains lead, if severed, must be destroyed,
as a plug with a bared flexible cord is
hazardous if engaged into a live socket
outlet.
Should the fuse in the 13 amp plug
require changing, a 13 amp BS1362 fuse
must be fitted.
WARNING: THIS APPLIANCE MUST BE
EARTHED.
Instructions for use
Symbol
(120 o C Max) Cool (160 o C Max) Warm (210 o C Max) Hot
Control knob
positions
Do not iron
at all
Fabric Nylon, Acetates
e.g. Acrilan
Courtelle, Orlon
Triacetates, e.g.
Tricel/Polyester
Wool, Polyester
mixtures e.g.
Polyester/Cotton
Cotton, Linen
Rayon, Rayon
mixtures,
e.g. Rayon/Linen
Ironing Iron on wrong side
if moisture required
use damp cloth
(Not Acetate)
Fabrics requiring this
setting usually require
steam pressing for heavy
cotton, denim etc.
Steaming
Temperature guide
Heat setting markings on the adjustable control dial of all Morphy Richards irons match those
of the International Textile Care Labelling Code.
42271 rev4 30/7/08 15:56 Page 3