Mercedes-Benz 2004 C-Class Coupe - Manual (Page 118)

118
Controls in detail
Control system
Malfunctions have occurred
If malfunctions have occurred, you will see
the number of malfunctions in the display:
1 Number of malfunctions
̈ Press button k or j.
The stored messages will now be dis-
played in order. For malfunction and
warning messages, see “Messages in
the display” (
୴ page 264).
Should any malfunctions occur while driv-
ing, the number of malfunctions will reap-
pear in the display when the SmartKey in
the starter switch is turned to position 0 or
removed from the starter switch. Settings menu
In the SETTINGS menu there are two func-
tions:
ț The function RESET TO FACTORY SET-
TINGS , with which you can reset all the
settings to the original factory settings.
ț A collection of submenus with which
you can make individual settings for
your vehicle.
̈ Press button è or ÿ repeatedly
until the SETTINGS menu is seen in the
display.
i
The message memory will be cleared
when you turn the SmartKey in the
starter switch to position 1 or 2. You
will then only see high-priority
messages in the multifunction display
(
୴ page 264).