MITSUBISHI ELECTRIC J2-JRSERIES MR-J2-03A5 - Manual (Page 9)

A - 8
(5) Auxiliary equipment and options
(a) The circuit protector used should be the EN or IEC Standard-compliant product of the model
described in Section 12.2.2.
(b) The sizes of the cables described in Section 12.2.2 meet the following requirements. To meet the
other requirements, follow Table 5 and Appendix C in EN60204.
y
Ambient temperature: 40 (104) [ ° C ( ° F)]
y Sheath: PVC (polyvinyl chloride)
y Installed on wall surface or open table tray
(6) Performing EMC tests
When EMC tests are run on a machine/device into which the servo amplifier has been installed, it must
conform to the electromagnetic compatibility (immunity/emission) standards after it has satisfied the
operating environment/electrical equipment specifications.
For the other EMC Directive guidelines on the servo amplifier, refer to the "EMC INSTALLATION
GUIDELINES".