Fly over, Edit, 4 fly over 4.5.3.5 edit – Mio MioMap User Manual
Page 44

44
Note: You need not open Itinerary if you run into a roadblock or traffic jam. To get an 
immediate alternative route use the Bypass function of Recalculate (Page 41). 
Note: When you use this feature, MioMap will keep on excluding the same part of the 
map from later routes until you manually delete the route (Page 42), or restart 
MioMap. 
4.5.3.4 Fly Over
This feature has no navigation function, it merely provides a quick view of the route. 
It will present a simulation of the route showing what you will see later when 
navigating. 
There are two possibilities for running the simulation.
Fast Fly Over
Tap Fly Over to quickly run through the route. MioMap will fly the route in Cockpit 
mode at high speed to give you a rough overview of the route events. MioMap is 
tweaked to give you a smooth and easy-to-follow playback even at this speed. 
Press and hold the Main menu button (Page 10) then tap Fly Over to quickly run 
through the route. MioMap will fly the route in Cockpit mode at high speed to give 
you a rough overview of the route events. MioMap is tweaked to give you a smooth 
and easy-to-follow playback even at this speed. 
This mode is useful if you want to have a look at the route before you start your 
journey. Tap anywhere on the screen to stop the simulation. 
Lifelike simulation
Tap the Fly Over button without pushing any hardware buttons.
In this mode the simulation is run at normal speed (using the speed limit of the 
streets and roads in the route), and voice instructions are also played. 
This mode is mainly useful for demonstrating MioMap, or to learn the way it works 
before your start your first journey. 
4.5.3.5 Edit
Tap Edit to see the list of all points used in the route. The first item in the list is the 
departure point of the route without a valid GPS position, the last reached via point if 
you open the list during navigation, or the point where MioMap most recently 
recalculated the route. This means the list is permanently updated, and via points 
drop out during the journey. The last item in the list is your final destination. 
