Metabo Routers and Planers - Manual (Page 5)

180 |
ACCESSORIES FOR ROUTERS
FOR OFE 738 AND OFE 1229 SIGNAL
Order no.
Parallel guide
Parallel guide/
ripping fence with
fine adjustment for
routers OFE 738 and
Of E 1229 Signal
(supplied as standard) 6.31507
Guide with guide roller
For fitting on the
parallel guide/ripping
fence of routers
OFE 738 and
Of E 1229 Signal,
for moulding/routing
curved edges
6.30360
Circle-cutting
centering pin
For using in the
parallel guide/
ripping fence of
routers OFE 738 and
Of E 1229 Signal,
for milling circular
grooves and
similar work
6.31504
Mitre guide
Provides particularly
good guidance for
the routers OFE 738
and Of E 1229 Signal
when working on the
edges of boards and
panels, (e.g. for cutting
recesses for furniture
fittings and mortise
locks, or grooves for
tongued edging strips)
6.30103
Intermediate plate
For fixing on the
base plate of
routers OFE 738 and
Of E 1229 Signal,
especially suited
for trimming edging
strips flush
with edges
6.31503
Circle-cutting guide
For cutting out
round openings,
moulding/routing
circular grooves,
rounding off corners,
etc., maximum circle
diameter 350 mm
6.31505
Template followers
Diameter: 9 mm
6.30105
Diameter: 11 mm 6.30106
Diameter: 17 mm 6.30118
Diameter: 24 mm 6.30119
Diameter: 27 mm 6.30120
Diameter: 30 mm 6.30121
Order no.
NEW
Precision guide rail
Clean-cut edges
with no splintering
thanks to the guide
rail's plastic-extrusion
strip edging –
even with bevel
cuts up to 45°
Guide rail made of
sturdy, anodised
Aluminium
extrusion
Anti-slip backing
provides safe and
reliable support
and protects the
workpiece surface
against scratches
Guide rule,
adjustable
to eliminate play
Overall length:
1.500 mm
6.31213
Router guide
For these tasks
the 6.31503
intermediate plate
must be fitted to the
router's base plate
Enables moulding/
routing with routers
OFE 738 and
Of E 1229 Signal
along the precision
guide rail 6.31250/
6.31213
6.31248
Metabox IV
Metabox IV for
Of E 1229 Signal
Dimensions:
395 x 295 x 315 mm 6.24620
FOR OFE 738 AND OFE 1229 SIGNAL
Order no.
Flexible shaft
Suitable for
speeds of 7 500 to
30 000 rpm
Bearing-mounted
at both ends
Equipped with
collet for size 8 mm,
6.30979
Length: 1,3 m
Driving shaft: 8 mm
Collet bore: 8 mm
Weight: 0,8 kg
6.30980
Collets for flexible
shaft 30980
Collet bore: 3 mm
6.30976
Collet bore: 6 mm 6.30977
Collet bore: 1/4" (6.35 mm) 6.30978
Collet bore: 8 mm 6.30979