Metrologic Instruments IS4921 - Manual (Page 53)

47
United States
EMC
All combinations of imaging engines and associated electronics will require testing to insure compliance with
the following Federal Communications Commission regulation: 47 CFR Part 15
Note: When using the imaging engine with RF equipment, modems, etc. may require examination(s) to the
standard(s) for the specific equipment combination. It is the manufacturers’ responsibility to comply
with the applicable federal regulation(s).
The IS4920 series area imaging engine is designed to meet EN55022 Radiated Class B emission limits.
The engine was installed in a representative system and tested for compliance.
Canada
EMC
Products meeting FCC 47 CFR Part 15 will meet Industry Canada interference-causing equipment standard for
digital apparatus, ICES-003. Additional testing is not required.
A written notice indicating compliance must accompany the apparatus to the end user. The notice shall be in
the form of a label that is affixed to the apparatus. The notice may be in the form of a statement included in the
user’s manual if, because of insufficient space or other restrictions, it is not feasible to affix a label to the
apparatus.