Metrologic Instruments IS4921 - Manual (Page 2)

Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information
contained in this document without prior notice, and the reader should in all cases consult HII to determine
whether any such changes have been made. The information in this publication does not represent a
commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein: nor for incidental or
consequential damages resulting from the furnishing, performance, or use of this manual.
This document contains propriety information that is protected by copyright. All rights reserved. No part of this
document may be photocopied, reproduced, or translated into another language without the prior written
consent of HII.
© 2009 Honeywell International Inc. All rights reserved.
Web Address: www.honeywell.com/aidc
Trademarks
Metrologic, MetroSelect, MetroSet2, Omniplanar, and FirstFlash are trademarks or registered trademarks of
Metrologic Instruments, Inc. or Honeywell International Inc.
Microsoft, Windows, and Windows 95 are trademarks or registered trademarks of Microsoft Corporation.
Molex, FFC/FPC, and SlimStack are trademarks or registered trademarks of Molex, Inc.
Other product names mentioned in this manual may be trademarks or registered trademarks of their respective
companies and are the property of their respective owners.
Patents
Please refer to page 50 for a list of patents.