beautypg.com

Operation, Selecting a temperature, Selecting a fan speed – MITSUBISHI ELECTRIC SLZ-A09 User Manual

Page 4: Adjusting vertical airflow direction, Using the timer

background image

4

2. Operation

2.5. Selecting a temperature

s

s

s

s

sTo decrease the room temperature:
1Press

TOO

WARM

button to set the desired temperature.

A The selected temperature is displayed.

• Each time you press the button, the temperature value decreases by 1 °C.

s

s

s

s

sTo increase the room temperature:
1Press

TOO

COOL

button to set the desired temperature.

A The selected temperature is displayed.

• Each time you press the button, the temperature value increases by 1 °C.

• Available temperature ranges are as follows:

Cooling/Drying:

19 - 30 °C

Heating:

17 - 28 °C

Automatic:

19 - 28 °C

2.6. Selecting a fan speed

1Press

FAN

button to select a desired fan speed.

• Each time you press the button, available options change with the dis-

play A on the remote controller, as shown below.

Fan speed

Remote controller display

Low

Medium

High

3-stage

In the following situations, the display differs from the fan speed of the unit.
• In the case of DEFROST/STAND BY lamp lighting of the unit.
• Just after the heating mode (while waiting to change to another mode).
• When the temperature of the room is higher than the temperature set-

ting of the unit operating in the heating mode.

• In drying mode, the indoor fan sometimes stops.

2.7. Adjusting vertical airflow direction

The vertical air vane helps select the vertical direction of the airflow.
1Press

VANE

button to select the vertical airflow direction.

A Each time you press the button, the option changes are displayed on

the remote controller, as shown below.

1

→ 2

→ 3

→ 4

→ 5

1 Horizontal airfrow 30°

4 Downword airfrow 70°

2 Downword airfrow 45°

5 Swing

3 Downword airfrow 55°

• In either cooling or drying mode, if you select 2 or 3 or 4 when the fan

speed is Low or Medium, the airconditioner will switch automatically to
Horizontal airflow 1 mode after one hour.

In the following situations, the display differs from the vertical airflow direc-
tion of the unit.
• In the case of DEFROST/STAND BY lamp lighting of the unit.
• When the temperature of the room is higher than the temperature set-

ting of the unit operating in the heating mode.

2.8. Using the timer

It is convenient to set the timer when you go to bed, when you get home,
when you get up, etc.
1Select the timer mode by pressing the

SELECT

button during operation.

A Each time this button is pressed, the timer mode is changed in se-

quence:

(OFF TIMER)

(ON TIMER)

TIMER RELEASE

2Set the time of the timer using the

TIME

button.

B Each time this button is pressed, the set time increases by 1 hour to

12 hours.

To release the timer:
• Press the

SELECT

button until

(OFF TIMER) and

(ON TIMER)

are not displayed.

Note:
The OFF TIMER and the ON TIMER cannot be set at the same time.

ON/OFF

RESET

TOO

WARM

TOO

COOL

MODE

AUTO COOL

DRY

HEAT

FAN

VANE

SELECT

TIME

1

A

For SLZ-A09/A12/A18AR

ON/OFF

RESET

TOO

WARM

TOO

COOL

MODE

AUTO COOL

DRY

HEAT

FAN

VANE

SELECT

TIME

1

A

ON/OFF

RESET

TOO

WARM

TOO

COOL

MODE

AUTO COOL

DRY

HEAT

FAN

VANE

SELECT

TIME

1

A

For SLZ-A09/A12/A18AR

For SLZ-A09/A12/A18AR

ON/OFF

RESET

TOO

WARM

TOO

COOL

MODE

AUTO COOL

DRY

HEAT

FAN

VANE

SELECT

TIME

h

1

B

A

2

s

For SLZ-A09/A12/A18AR

This manual is related to the following products: