Morphy Richards GrimeBuster steam cleaner - Manual (Page 8)

Wall paper stripper ˆ *
(certain models only) J
1 Fit wallpaper stripper directly to the hose
handle, locking into place. J
2 Press the steam on/off button ‹. The
orange light will come on.
3 Place the wallpaper stripper with its
entire surface on the edge of a sheet of
wallpaper. Press the handle control
steam switch and allow the steam to
penetrate until the wallpaper is soaked
through (approx. 10 sec.).
4 Without switching it off, move the
wallpaper stripper to a new location.
5 Use a putty knife to lift the loosened
wallpaper, and pull it off completely.
* These accessories are available as
optional extras, if not supplied with your
machine, please contact our helpline for
more information.
Maintenance
Cleaning the boiler
1 Disconnect from the mains and make
sure it is cold.
2 To clean the boiler, fill boiler with water
and shake it vigorously to loosen any
scale that has settled at the bottom of
the boiler.
3 Pour the water out of the boiler and the
scale will be flushed out.
Descaling the boiler
In order to keep the heat-up time
constant it is recommended to de-scale
your cleaner at regular intervals.
1 Mix one litre of water with 0.25 litres of
vinegar and pour into a boiler with the
funnel provided.
2 Shake the cleaner and then allow the
mixture to work for at least one hour.
3 Empty and rinse the boiler until water is
clear.
Consumables
If you experience any difficulty in
obtaining service or spare parts, please
telephone our customer helpline (during
office hours)
Helpline
If you have any difficulty with your
appliance do not hesitate to call us. We are
likely to be more help than the store from
where it was bought.
Please have the following information
ready to enable our staff to help you.
• Name of product
• Model number as shown on the
underside of the appliance.
8
J
70515+70516 Rev 1 19/5/04 3:59 PM Page 8