Morphy Richards Steam cleaner User Manual
Steam cleaner, Getting the best from your new steam cleaner, With attachments

Steam cleaner
with attachments
Please read and keep these instructions
www.morphyrichards.co.uk
getting the best from your
new steam cleaner...
• Quick start
1 Fill the tank up to a maximum of 1.4 litres of water (using warm
water and less water will reduce heat-up time). Screw cap on
and tighten fully.
2 Attach the required accessories.
3 Connect to the power supply.
4 Press the on/off button to start heat-up. When orange light turns
off, the steam is ready.
5 Press the trigger on the handle to release the steam.
6 Aim the steam safely: Note at the start water may be ejected.
Hold over a sink or bucket until excess water has cleared.
• Descale
Descale regularly, do not wait for a problem to occur. In very hard
water areas we recommend using distilled water. See page 10 for
descaling instructions.
70530 Rev 4 2/6/04 2:53 PM Page 1