MITSUBISHI ELECTRIC 737 - Manual (Page 68)

68 Appendices
HDMI Control of an HDMI A/V
Receiver and Connected Devices
Note: Connect the A/V receiver to the TV with an
HDMI cable before making other connections.
Enable HDMI Control for the A/V receiver as 1.
described in “Enabling HDMI Control of CEC
Devices” on the previous page.
Power on the HDMI device you wish to connect to
2.
the A/V receiver (such as a disc player, cable box,
or satellite receiver). Allow the device to complete
the power-on sequence (boot up). Stop playback if
the device starts playing.
Connect the device to the A/V receiver with an
3.
HDMI cable.
Select the device’s HDMI input on the A/V receiv-
4.
er’s front panel controls or remote control.
When the TV detects the connection, the
5. New
Device Found screen will appear.
Note: If the TV is unable to detect the device, either
the device’s CEC capability is not enabled or
the device is not CEC compatible. Enable
HDMI control through the device’s menus
before continuing. You may need to temporar-
ily connect the device directly to the TV to view
device menus.
Highlight 6. On.
Highlight 7. EXIT and press ENTER to close the New
Device Found screen.
Optional: Connect the TV’s
8. DIGITAL AUDIO
OUTPUT to an input on the A/V receiver. Use this
additional connection if:
You want the ability to switch between the A/V •
receiver speakers and the TV speakers.
You want to use the A/V receiver to listen to
•
devices connected to the TV only, e.g., an
antenna input or camcorder.
837 Series. 9. If desired, perform NetCommand IR
Learning to supplement CEC functions. You must
first connect and place IR emitters for the devices.
See page 45.
HDMI
3D
GLASSES EMITTER
AVR AUDIO OUTPUT
DIGITAL AUDIO OUTPUT
L
R
L R
(480i / 480p / 720p / 1080i) L R
DVI/PC INPUT VIDEO
Y Pb Pr
AUDIO
Pb Y/ VIDEO Pr
VIDEO: 480i/480p/720p/1080i/1080p AUDIO: PCM STEREO
PC: VGA, W-VGA, SVGA, W-SVGA, XGA, W-XGA, SXGA, 720p/ 1080p
1 2 3
HDMI
IR- NetCommand Output / External Controller Input
R
INPUT
3
INPUT
2
INP UT 1 S-VIDEO INPUT 3
AUDIO R L
AUDIO
ANT 2 / AUX
ANT 1 / MAIN
HDMI
1 2 3
DIGITAL AUDIO OUTPUT
DIGITAL
AUDIO
OUTPUT
HDMI OUT
DIGITAL
AUDIO
OUTPUT
High-definition
DVD player
DVD player
Cable box
VCR
TV back panel
A/V receiver with
HDMI output
Optional
digital audio
connection
Connecting HDMI devices. The optional digital audio
connection allows you to hear audio through the A/V
receiver from devices connected to the TV only.
Appendix C: HDMI Control of CEC Devices, continued