Motorola SATELLITE 9505 - Manual (Page 178)

174 Customizing Phone Features
System Scan Settings
Setting Description
Standard
Mode
Your phone first seeks a home type
system, then a non-home type system.
• If home system is non-wireline (type
A), you
will see Std A/B .
• If home system is wireline (type B),
you
will see Std B/A .
Reversed
Preference
Mode
Your phone first seeks a non-home type
system, then a home type system. (This
mode may be useful in fringe areas or
certain roaming situations.)
• If home system is non-wireline
(type A), you
will see Scan B/A .
• If home system is wireline (type B),
you
will see Scan A/B .
Home Only
Mode Your phone does not operate outside its
home system. You see
will Home Only .
Scan A
Mode
You phone operates only within
non-wireline (A) systems. You
will see
Scan A .
Scan B
Mode Your phone operates only within wireline
(B) systems. You
will see Scan B .
Enhanced
Preferred
Scanning
Mode
Your phone scans for home or
programmed preferred System ID
numbers (SIDs) first. This mode requires
entry of the SIDs for the systems in
which you wish to operate. Contact your
cellular service provider for SID
information.
If you have selected two system
operation, the phone seeks cellular
service according to the system type
mode selected for each phone number.
You will see Preferred SIDs .