Motorola SATELLITE 9505 - Manual (Page 164)

160 Customizing Phone Features
Unblock the PIN2 Code
If your PIN2 code is entered incorrectly three times
in a row,
!
Blocked appears in the display. You
need to enter a PIN2 unblocking key (PUK2), which
you can obtain from your service provider.
1. Press
* * 0 5 2 *
.
2. Enter unblocking key. Enter the eight-digit
PUK2 unblocking key, and then press
O
.
Your service provider supplies this code.
3. Enter a new PIN2 code , and then press
O
.
4. Re-enter the new PIN2 code , and then
press
O
.
Change the Security Code
The security code is your phone’s primary security
number. You use it to reset your phone to its default
settings and prevent access to your phone book. It
is originally set to 000000.
1. Follow the steps in “Getting to Phone
Setup...” to get to New Security Code , and then
press
O
to select. You will see Enter
Security Code .
2. Enter the current security code , and then
press
O
. You will see Enter New Security
Code .
3. Enter a new security code , and then
press
O
. You will see Secur . Code and the
six-digit number selected.
4. Press and hold
C
to exit the menu.
Getting to Phone Setup...
1. Press
M
until you see Phone Setup , and then press
O
.
2. Press
M
to scroll to one of the features described below.