Milan Technology MIL-S8001TG User Manual
Page 29
25
4-2-2-1. Port-Based VLAN Group Configuration
A maximum of 8 VLAN groups can be configured. The default VLAN group is
VLAN 1.
1. Enter the group number to configure a VLAN group. For example: enter “1”
for VLAN group 1.
2. To add a port to a VLAN group, use the command “+port number” to add
the port or enter “+A” to add all ports. To remove a port from a VLAN group,
use the command “-port number” or enter “-A” to remove all ports from the
group. In VLAN group 1, the default members are port 1 to port 8. A
maximum of 8 ports can be added to a VLAN Group.
3. Enter “s” or “S” at the command promt to save the configuration.
4. To view the VLAN group table, enter “l” or “L”.
Previous Menu: Enter “q” or “Q” and the command prompt to exit the current
interface.