Motorola HDT100 User Manual
Page 40
35
Connecting your A/V Receiver, VCR and High Definition TV
1
Connect the component video cable supplied with the HDT100 to the
Y, Pb, and Pr connectors on your TV and HDT100.
2
Connect an optical digital audio cable to the
OPTICAL
connector on
the HDT100 and the
OPTICAL
input connector on the A/V receiver.
3
Connect a video cable to the
VIDEO
connector on the HDT100 and
the
CABLE
/
TV VIDEO
connector on the A/V receiver.
If your equipment supports it, S-Video connections may be used in
place of the standard composite video connections. In most cases,
S-Video offers a higher level of standard definition video quality than
composite video.
4
Connect a stereo audio cable to the
VCR AUDIO OUT R
and
L
connectors on the A/V receiver and the
INPUT AUDIO R
and
L
connectors on the stereo VCR.
When using the Digital Audio output (
OPTICAL
or
SPDIF
), the left / right
baseband audio connections to the A/V receiver are not needed.
5
Connect a stereo audio cable to the
OUTPUT AUDIO OUT R
and
L
connectors on the stereo VCR and the
VCR AUDIO IN R
and
L
connectors on the A/V receiver.
6
Connect a video cable to the
INPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR OUT
connector on the A/V receiver.
7
Connect a video cable to the
OUTPUT VIDEO
connector on the stereo
VCR and the
VIDEO VCR IN
connector on the A/V receiver.
8
Connect a video cable to the
INPUT VIDEO
connector on the stereo TV
and the
TV
/
MONITOR OUTPUT VIDEO
connector on the A/V receiver.
To switch between viewing input from your VCR and input from your
HDT100, change your TV’s video inputs.