Adding a channel – Motorola HDT100 User Manual
Page 35
30
Adding a Channel
If you wish to add a specific channel to your program list or you have
made minor adjustments to your antenna, follow these steps for adding a
single channel:
1
Press
MENU
on the remote control or
MENU
/
ENTER
on the front panel.
The Menu screen is displayed.
2
Highlight Installation and press
SELECT
. The Password window is
displayed.
3
Enter your four-digit password. If you have not yet created your own
password, enter the default password: 0000. The Installation menu is
displayed.
If you wish to change your password, see “Changing Your
Password” on page 28.
4
Highlight Manual Scan and press
SELECT
. The Manual Scan window
is displayed:
5
Use the number keys on the remote control to enter the channel
number. Press the " key and then press
SELECT
to start the scan.
If the channel is successfully added, the “Get Channel Success”
message is displayed.