Motorola HDT100 - Manual (Page 36)

31
6
Press EXIT twice to exit the on-screen menu.
If the HDT100 is unable to lock on the channel’s signal, a “Time out
error” message is displayed. Adjust the antenna’s position and try adding
the channel again.
Customizing the On-Screen Menu and i-Banner
To change the transparency of the on-screen menu:
1
Press MENU on the remote control or MENU / ENTER on the front panel.
The Menu screen is displayed.
2
Highlight Menu Setup and press SELECT . The Menu Setup menu is
displayed.
3
Highlight Transparency and press SELECT . The transparency
indicator bar is displayed.
4
Use the # and $ keys to change the transparency of the on-screen
menu.
5
When finished, press EXIT twice to exit the on-screen menu.
To configure how your i-Banner is displayed:
1
Press MENU on the remote control or MENU / ENTER on the front panel.
The Menu screen is displayed.
2
Highlight Menu Setup and press SELECT . The Menu Setup menu is
displayed.
3
Highlight i-Banner Setup and press SELECT . The i-Banner Setup
window is displayed.
4
Use the ! and " keys to select an item. Press the # and $ keys to
change a setting:
Fading Mode Fade Out or No Fade
Display Time 1 – 10 seconds
Time Format AM/PM or 24 hr
5
When finished, press EXIT twice to exit the on-screen menu.