Connecting the antenna and power cord – Motorola HDT100 User Manual
Page 22
17
Connecting the Antenna and Power Cord
You can use an outdoor or indoor antenna to receive over-the-air high
definition TV signals:
1
Connect your antenna’s coaxial cable to the
ANT IN
connector on
your HDT100.
2
Plug the power cord supplied with your HDT100 into the HDT100’s
power connector and then plug the cord into a wall outlet.
Now that you’ve completed hooking up your HDT100, you’re ready to
program your HDT100 with over-the-air digital TV stations. Proceed to
“Auto Scan” on the following page for instructions.