McIntosh MDLP2 - Manual (Page 26)

26
RGB/HD Adjust
The RGB/HD allow for fine adjustments to be made to HD
(High Resolution) Video Signals. Refer to figure 29.
Mode - Auto: Automatically adjusts each of the RGB/HD
Menu items.
Memory: Allows for manual adjustments of the
1-3 RGB/HD Menu items and the adjustments
can be stored in one of three memory
locations.
Resolution H, V - Adjusts the horizontal and vertical reso-
lution of the RGB/HD input signals.
Position H, V - Adjusts the position of the input signal. H
adjusts the horizontal position of the input
signal. V adjusts the vertical position of the
Standard 1
Component 1
Component 2
S-Video
Video Auto
Auto
Auto
Auto
RGB Auto
HDMI 2
HDMI 1 Auto
Auto
Fine Menu 1
Fine Menu 2
Input Signal
RGB/HD Adjust
Display
OSD/Blanking
Config.
HDMI
Picture Adjust
Figure 28
ASPECT RATIO OPTIONS
16:9 VIDEO SOURCE 4:3 VIDEO SOURCE
MODE IMAGE DECRIPTION IMAGE DECRIPTION
INPUT
SIGNAL
(HDMI, 1080p signal)
The Image Source Aspect
Ratio is 1.78:1 The Image Source Aspect
Ratio is 1.33:1
FULL
The 16:9 image is displayed
with the correct aspect The 4:3 image is enlarged
horizontally
NORMAL
The picture in normal ratio
16:9 is displayed The picture in normal ratio
4:3 is displayed
ZOOM
Bot h t he ve r t ica l a nd
horizontal components are
enlarged Bot h t he ve r t ica l a nd
horizontal components are
enlarged
V-STRETCH
The vertical component of the
aspect ratio is elongated The vertical component of the
aspect ratio is elongated
THROUGH Images are actual pixel size Images are actual pixel size
Figure 27