MITSUBISHI ELECTRIC DD-8040 - Manual (Page 18)

– 18 – EN
1L25
STARTING FROM A DESIRED
TIME COUNT
1 Press the SEARCH MODE button twice
during playback.
2 Press the numeric buttons to set the desired
time count.
¡ Example: 1 hour, 23 minutes and
30 seconds
1 2 3 3 0
Notes
¡ In the case of DVD Video, Time Search in Title is
effective, but Time Search in Chapter is ineffective.
¡ In the case of DVD Audio, CD and Video CD, Time
Search in Track is effective, but Time Search in the
entire disc is ineffective.
¡ Playback from a desired time count is not available
with some discs or if the unit is in stop mode.
¡ If wrong numbers are entered, press the CLEAR
button and re-enter the correct numbers.
VCD ( )
CD DVD-RW DVD-V DVD-A
: : 1 : 23 : 45 TOTAL
RANDOM
1 Press the MODE button in stop mode.
¡ The program setting menu screen will appear.
2 Press the MODE
button again.
CD
PLAY
RANDOM PROGRAM
- - no indication - -
CD [AUDIO] TOTAL 0:45:55
RANDOM
3 Press the PLAY button. Random playback
will then start.
Note
¡ Program playback is not available during random playback.
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a disc.
1 Press SEARCH MODE four times (CD: three
times) during playback.
¡ The display screen and Markers will appear on the
TV screen.
2 Press s or B to select 1, 2, 3, 4, 5, 6, 7, 8, 9
or 10 and ensure that “_ : _ _ : _ _” appears
in the display.
3 When reachs the desired point, press ENTER.
¡ The Title or Track and elapsed playing time will
appear in the TV screen.
VCD ( )
CD DVD-RW DVD-V DVD-A
Notes
¡ Opening the disc tray, turning off the power, or
selecting AC at step 2 and pressing ENTER will
erase all Markers.
¡ To clear a marker, using s or B, position the cursor on to
the marker number to be cleared and press CLEAR.
¡ You can mark up to 10 points.
¡ In the case of DVD Audios, marker searching may
start playback from the head of the marked TR, in
some discs or groups.
5 Press SEARCH MODE or RETURN to exit.
without PBC
function
without PBC
function
1 Press the MODE button
three times in stop mode.
2 Press o/p buttons to select the group you
wish to playback randomly, then press the
ENTER button.
¡ Selecting “ALL” starts random
playback of all groups.
3 Press playback button, Random playback
will then start.
Notes
¡ During random playback, TITLE, MENU, Arrow and
ENTER buttons on the remote controller are disabled.
¡ When the designated random playback ends, it changes to
stop mode.
DVD-A
1/2
DVD-AUDIO
RANDOM
ENTER
PLAY
CLEAR
ALL
1
52:43
2 45:02
3 41:22
4 34:35
5 13:49
6 33:05
3 41:22
PLAY
RANDOM PROGRAM
- - no indication - -
1 TOTAL 0:53:42
RANDOM
TRICKS WITH THE SKIP BUTTONS
(H, G)
If the SKIP button G is pressed during playback or
while playback is paused, the current chapter will be
skipped and the next chapter will be played. When
the SKIP button H is pressed once, the top of the
current chapter will be located for replaying. When
the SKIP button H is pressed again within
2-seconds after playback begins, the previous
chapter will be located.
4 To return to the Marker later, press SEARCH
MODE four times (CD: three times) during
playback, and s or B to choose the desired
marker, then press ENTER.
E5733UD.qxp 03.5.13 15:07 Page 18