MITSUBISHI ELECTRIC N0701 - Manual (Page 13)

E
E-5
Pincushion/Barrel: Decreases or increases the curvature
of the sides either inward or outward.
Trapezoid: Decreases or increases the bottom of the screen
to be the same as the top.
Parallelogram: Decreases or increases the tilt of the sides
either to the left or right.
Bow (Pincushion Balance): Decreases or increases the
curvature of the sides either to the left or right.
Rotates: Rotates the image.
Degauss: Select the degauss icon on “Icon select window”
and push “SELECT” button.
It will eliminate the stray magnetic field and correct the scan
of the electron beam, which affect the purity, focus and
convergence.
Note:
Allow a minimum interval of 20 minutes to elapse
between uses of the degauss function.
9300K Color Temperature: Select the Color Temperature icon on
“Icon Select Window” and push “SELECT” button.
OSD: There are 3 background colours (Blue, Black, and
white). These can be selected by “SELECT” button after the
selection of “OSD” on ”Icon select window”.
exit EXIT: To exit OSD window. Select EXIT on “Icon select
window”, then push “SELECT” button.
Note: If you do not push buttons within 10 seconds in OSD
condition, the window will automatically disappear.