Controls – MITSUBISHI ELECTRIC N0701 User Manual
Page 12
E-4
Controls
OSD(On-screen Display) control buttons on the
front of the monitor function as follows:
SELECT
Enters and exits the OSD menu.
-/+
Selects one of the controls and decreases or increases the
adjustment.
RESET
Resets the highlighted control to the factory setting.
Press -/+ button at the same time for approximately 1 sec.
Brightness:
Adjusts the overall image and background
screen brightness.
Contrast:
Adjusts the image brightness in relation to the
background.(Contrast control is also effective with “-,+”
button even though OSD window is not visible.)
R
Red Color Control:
Adjust the red contrast of the display.
G
Green Color Control:
Adjust the green contrast of the
display.
B
Blue Color Control:
Adjust the blue contrast of the display.
Horizontal:
Moves the image horizontally left or right.
Vertical position:
Moves the image vertically up or down.
Horizontal size:
Decreases or increases the horizontal size
of the image.
Vertical size:
Decreases or increases the vertical size of the
image.
The Geometry controls allow you to adjust the curvature or angle of the
sides of your display.