Metrologic Instruments Genesis MS7580 - Manual (Page 15)

11
I
NSTALLATION
USB
The MS7580 meets the requirements for Full Speed USB hardware.
The USB interface is configurable for Keyboard Emulation Mode, Bi-
Directional Serial Emulation Mode or IBM OEM. The default setting for
the USB interface is Keyboard Emulation Mode.
For information on configuring the MS7580 for USB Serial Emulation
Mode or IBM OEM, please refer to the USB section of the MetroSelect
Single-Line Configuration Guide (
MLPN
00-02544).
Plugging the scanner into a port on the host device does not guarantee
that scanned information will be communicated properly to the host
device. The scanner is shipped from the factory configured with default
settings. Please refer to the MetroSelect Single-Line Configuration
Guide (
MLPN
00-02544) or MetroSet2’s help files for instructions on
changing the scanner’s configuration. In addition, please check that the
scanner and host system are using the same communication protocol.