Changing the dnd settings, Changing the manual call forwarding settings – Mitel 8662 User Manual
Page 56
Call Features
Page 42
Mitel
®
8662 IP Phone User Guide – Issue 14, May 2010
Changing the DND Settings
for more information about using DND.
To turn on DND using Remote Programming:
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
for details on setting up a
Station password for your extension.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message
text (if applicable).
To turn off DND using Remote Programming:
Follow steps 1 through 4 above, and then dial 371.
Changing the Manual Call Forwarding Settings
See “Manual Call Forwarding” on
for more information about Manual Call Forwarding.
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA password.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your Station password followed by #. See
for details on setting up a
Station password for your extension.
5. Dial one of the following Call Forwarding feature codes:
•
355 (All)
•
356 (No answer)
•
357 (Busy)
•
358 (No Answer/Busy)
6. Enter either an extension number or 8 followed by a phone number.
To turn off Call Forwarding using Remote Programming:
Dial 355, and then hang up.