beautypg.com

Special playback – Memorex MVD4540 User Manual

Page 26

background image

26

Adjusting tracking condition

Special playback

Reverse picture search function
Press REW x 1 or x 2 during the playback.

Picture Search

Forward picture search function
Press F.FWD x 1 or x 2 during the playback.
To return to playback: Press PLAY.

Still Picture

Press PAUSE during playback. To resume normal
playback: Press PLAY.

Slow Motion

During playback press SLOW.
To return to playback: Press PLAY or SLOW.

Whenever you insert a tape and start playback,
automatic tracking starts working and continuously
analyzes the signal to enable optimum picture quality
during playback.

Press PAUSE during playback.
Press SLOW repeatedly. The picture advances frame
by frame.
To return to playback: Press PLAY or PAUSE.

Frame by Frame picture

NOTES:
• The audio output is muted during SPEED SEARCH,

STILL, FRAME ADVANCE and SLOW MOTION.

• During picture search mode there will be noise bars

which are caused by the system.

• The Special Playback will automatically change to

playback after approx. 5 minutes to protect the video
tape against excessive wear.

Slow tracking and vertical lock adjustment
If noise bars appear in the picture during slow motion,
press the TRACKING + or to reduce the noise bars.
If the still picture jitters excessively, press TRACKING
+
or to stabilize the still picture.

Automatic tracking adjustment

If automatic tracking cannot eliminate noises sufficiently
during playback, press TRACKING +/– to eliminate the
noises.
“MANUAL TR.” will appear. Press it briefly for a fine
adjustment, or press and hold for a coarse adjustment.

Manual tracking adjustment

Repeat playback

The entire video tape will be played until its end. The
tape will then automatically rewind to the beginning and
the playback will be repeated.

1

Press SETUP MENU. Press

or

to select

AUTO REPEAT.

3

Press VCR MENU until the menu screen is
cleared.
if you press CALL, "

" will appear on the screen.

Then press ENTER to
select [ON] or [OFF].
If [ON] is selected, the
playback will be
repeated endlessly.

4

To start the playback, press PLAY.
The playback will be repeated endlessly.

2

To cancel repeat mode:
Follow the above step 1, then press ENTER to select
the OFF position. Press VCR MENU to return to the
TV.

Press ATR to reactivate automatic tracking again.
“AUTO TR.” will appear.

+/-/ENTER/MENU

MENU

TIMER REC SET

AUTO REPEAT

ON

OFF

ON

OFF

SAP

CH SET UP
SYSTEM SET UP

PICTURE SEARCH SPEED

PRESS TWICE

TAPE SPEED

PRESS ONCE

SP (Standard Play)

LP (Long Play)

SLP (Super Long Play)

5 X

9 X

15 X

3 X

7 X

9 X

SPEED SEARCH TIMES

2A77001AE(22-27)

8/29/02, 11:01 AM

26