Memorex MVD4540 - Manual (Page 18)

18
EJECT
OPEN/
CLOSE
CH
CH
DVD MENU RETURN
SET UP/
VCR MENU
CLEAR/
CANCEL
ANGLE/
COUNTER RESET
CLOCK/
COUNTER
PLAY MODE/
SPEED
AUDIO/
AUDIO SELECT
TV/VCR
PLAY
INDEX/SKIP SKIP/INDEX
SLOW PAUSE/STILL
STOP
ZOOM
VCR/DVD
DISPLAY/CALL
TRACKING/
SET
—
TRACKING/
SET
+
TITLE REPEAT A-B
REW/SEARCH SEARCH/F.FWD
POWER
TIMER REC
REC/OTR
SUB TITLE/
ATR
MEMORY/
ZERO RETURN
1 2 3
INPUT SELECT 4 5 6
0 7 8 9
SELECT/
ENTER
Setting the video channel / Setting the language
To view playback of a recorded tape
or DVD disk, or to watch a program
selected by the VCR's channel
selector, the TV must be set to
channel 3 or 4 (video channel).
NOTES:
• If the unit does not operate
properly, or if it does not respond
to commands via the unit and/or
the remote control: Static electric-
ity, etc., may affect the player's opera-
tion. Disconnect the AC power cord
once, then connect it again.
• Both the VCR and the DVD have their
own menu option (See page 36).
• If no buttons are pressed for more
than 60 seconds, the MENU screen
will return to normal TV-operation
automatically.
1
Press POWER to turn on the DVD/VCR.
2
Press VCR/DVD to select the VCR mode. The VCR indicator
on the front panel will light.
You can choose from three different languages (English,
French and Spanish) for the on-screen displays.
When a TV is connected with the 75 ohm coaxial cable only.
3
Set the 3/4 Channel selector switch on the rear panel to CH
3 or 4.
4
Turn ON the TV and set to CH 3 or 4 to correspond with the
channel selected in step 3.
5
Press TV/VCR to select the VCR position.
The VCR indicator will appear in the display.
6
Select any channel to receive a TV station in your area.
The channel number will appear on the screen for about
4 seconds.
For a push-button TV tuner
If CH 3 or 4 corresponding to the video channel cannot be tuned
on your TV, proceed as follows: set the VCR 3/4 channel selector
and the TV to CH 3 or 4, play back a prerecorded tape and tune
the TV to receive a sharp color picture from the video cassette
recorder. Refer to your TV owner's manual for details.
Setting the video channel
Setting the language
3
Press VCR MENU,
If you use the unit for the first time
and press VCR MENU, instead of
the main menu screen on the right
the “SYSTEM SET UP” menu
screen in step 2 may appear.
Press or to select the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.
1
2
Press or to select the
“LANGUAGE” option, then press
ENTER.
4
Press VCR MENU until the MENU screen is cleared.
〈 +/-/ENTER/MENU 〉
MENU
TIMER REC SET
AUTO REPEAT ON OFF
ON OFF SAP
CH SET UP
SYSTEM SET UP
á+/-/ENTER/MENUñ
SYSTEM SET UP
CLOCK SET
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
AUTO CLOCK
STANDARD TIME
DAYLIGHT SAVING TIME
ON OFF
ON OFF
2A77001AE(16-21) 8/29/02, 11:02 AM 18