Memorex MVD4540 - Manual (Page 22)

22
3
Tuner setting
This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to
the next channel set into memory, skipping over unwanted channels. Before selecting channels, they
must be programmed into the DVD/VCR’s memory. In addition to normal VHF and UHF channels, this DVD/
VCR can receive up to 113 Cable TV channels. To use this DVD/VCR with an antenna, set the TV/CATV
menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.
Press VCR MENU. The VCR menu screen will appear. Press
or to select “CH SET UP”, then press ENTER.
Then press ENTER to select the
TV or CATV mode. The arrow
indicates the selected mode.
1
2
Press or to select the “TV/
CATV” option.
4
Press VCR MENU until the menu screen is cleared.
TV - VHF/UHF channels
CATV - CABLE TV channels
2
Setting channels automatically
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
Then press ENTER.
The auto tuning will start. The
channel display will count up and
when finished, the screen returns
to normal.
1
Repeat above step 1 and press
or to select “AUTO CH
MEMORY”.
TV/CATV selection
Turn ON the TV and set to the video input mode.
Press VCR/DVD to select the VCR mode. (The VCR indicator
will light.)
Preparation:
•
•
〈 +/—/ENTER/MENU 〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈 +/—/ENTER/MENU 〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
〈 +/-/ENTER/MENU 〉
CH SET UP
TV CATV
AUTO CH MEMORY
ADD/DELETE
CH 002
EJECT
OPEN/
CLOSE
CH
CH
DVD MENU RETURN
SET UP/
VCR MENU
CLEAR/
CANCEL
ANGLE/
COUNTER RESET
CLOCK/
COUNTER
PLAY MODE/
SPEED
AUDIO/
AUDIO SELECT
TV/VCR
PLAY
INDEX/SKIP SKIP/INDEX
SLOW PAUSE/STILL
STOP
ZOOM
VCR/DVD
DISPLAY/CALL
TRACKING/
SET
—
TRACKING/
SET
+
TITLE REPEAT A-B
REW/SEARCH SEARCH/F.FWD
POWER
TIMER REC
REC/OTR
MEMORY/
ZERO RETURN
1 2 3
INPUT SELECT 4 5 6
0 7 8 9
SELECT/
ENTER
SUB TITLE/
ATR
You can’t select “CH SET UP” if you
set the channel to “L”.
NOTE:
2A77001AE(22-27) 8/29/02, 11:01 AM 22