Miele KM 411 - Manual (Page 19)

Stainless steel surround
Clean the stainless steel surround with
hot water and a little washing up liquid
applied with a soft sponge. Wipe dry
using a soft cloth. Soak stubborn soiling
first to loosen it.
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or a proprietary
non-abrasive cleaning agent designed
specifically for use on stainless steel.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel,
such as Neoblank (available from the
Miele Spare Parts Department) can also
be used.
Follow the manufacturer's instructions
on the label and apply sparingly with an
even pressure following the direction of
the grain.
Glass control panel
Clean the glass surface and control
with a damp cloth only, and then wipe
dry.
If wished you can use a proprietary
glass cleaning agent afterwards. Follow
the manufacturer's instructions.
Cleaning and care
19